Using Custom Domains With IIS Express

This is what worked for me (Updated for VS 2013, see revision history for 2010, for VS 2015 see this: https://stackoverflow.com/a/32744234/218971):

Right-click your Web Application Project ▶ Properties ▶ Web, then configure the Servers section as follows: Select IIS Express ▼ from the drop down Project Url: http://localhost Override application root URL: http://dev.example.com Click Create Virtual Directory (if you get an error here you may need to disable IIS 5/6/7/8, change IIS's Default Site to anything but port :80, make sure Skype isn't using port 80, etc.) Optionally: Set the Start URL to http://dev.example.com Open %USERPROFILE%\My Documents\IISExpress\config\applicationhost.config (Windows XP, Vista, and 7) and edit the site definition in the config block to be along the lines of the following: If running MVC: make sure the applicationPool is set to one of the "Integrated" options (like "Clr2IntegratedAppPool"). Open your hosts file and add the line 127.0.0.1 dev.example.com. ► Start your application!

Some great advice from the comments:

You may need to run Visual Studio as Administrator. If you want to make other devs see your IIS run netsh http add urlacl url=http://dev.example.com:80/ user=everyone If you want the site to resolve for all hosts set bindingInformation="*:80:". Use any port you want, 80 is just convenient. To resolve all hosts you'll need to run Visual Studio as an administrator

For Visual Studio 2015 the steps in the above answers apply but the applicationhost.config file is in a new location. In your "solution" folder follow the path, this is confusing if you upgraded and would have TWO versions of applicationhost.config on your machine.

\.vs\config

Within that folder you will see your applicationhost.config file

Alternatively you could just search your solution folder for the .config file and find it that way.

I personally used the following configuration:

https://i.stack.imgur.com/1IQXV.png

With the following in my hosts file:

127.0.0.1       jam.net
127.0.0.1       www.jam.net

And the following in my applicationhost.config file:

<site name="JBN.Site" id="2">
    <application path="/" applicationPool="Clr4IntegratedAppPool">
        <virtualDirectory path="/" physicalPath="C:\Dev\Jam\shoppingcart\src\Web\JBN.Site" />
    </application>
    <bindings>
        <binding protocol="http" bindingInformation="*:49707:" />
            <binding protocol="http" bindingInformation="*:49707:localhost" /> 
    </bindings>
</site>

Remember to run your instance of visual studio 2015 as an administrator! If you don't want to do this every time I recomend this:

How to Run Visual Studio as Administrator by default

I hope this helps somebody, I had issues when trying to upgrade to visual studio 2015 and realized that none of my configurations were being carried over.

When using Visual Studio 2012 with IIS Express, changing an existing binding does not work permanently. (It may work until you close VS, but after that, things get really messed up.)

The key is keeping the existing localhost binding and adding a new binding after it.

Unless you're running as administrator, you'll also need to run netsh add urlacl (to give yourself permissions to run a non-localhost site as a standard user).

If you want to allow any host name, the full process is as follows:

Create your web application, and find out what port it is using (see project properties, Web tab, Project Url). From an administrator prompt, run the following commands (replacing portnumber with the port number you figured out in #1): netsh http add urlacl url="http://*:portnumber/" user=everyone netsh http add urlacl url="http://localhost:portnumber/" user=everyone

You can also use your user name (DOMAIN\USER) instead of everyone for better security.

Open applicationhost.config (usually under My Documents\IIS Express\config), and find the element with your port number. Add one more binding with the host name you want (in this case, *). For example:

Note that, if want to open up all host names (*), you'll need two netsh commands (one for * and one for localhost). If you only want to open up a specific host name, you don't strictly need the second netsh command (localhost); just the one with your specific host name is sufficient.

The invalid hostname indicates that the actual site you configured in the IIS Express configuration file is (most likely) not running. IIS Express doesn't have a process model like IIS does.

For your site to run it would need to be started explicitly (either by opening and accessing from webmatrix, or from command line calling iisexpress.exe (from it's installation directory) with the /site parameter.

In general, the steps to allow fully qualified DNS names to be used for local access are Let's use your example of the DNS name dev.example.com

edit %windows%\system32\drivers\etc\hosts file to map dev.example.com to 127.0.0.1 (admin privilege required). If you control DNS server (like in Nick's case) then the DNS entry is sufficient as this step is not needed. If you access internet through proxy, make sure the dev.example.com will not be forwared to proxy (you have to put in on the exception list in your browser (for IE it would be Tools/Internet Options/Connections/Lan Settings, then go to Proxy Server/Advanced and put dev.example.com on the exeption list. Configure IIS Express binding for your site (eg:Site1) to include dev.example.com. Administrative privilege will be needed to use the binding. Alternatively, a one-time URL reservation can be made with http.sys using netsh http add urlacl url=http://dev.example.com:/ user= start iisexpress /site:Site1 or open Site1 in WebMatrix

On my WebMatrix IIS Express install changing from "*:80:localhost" to "*:80:custom.hostname" didn't work ("Bad Hostname", even with proper etc\hosts mappings), but "*:80:" did work--and with none of the additional steps required by the other answers here. Note that "*:80:*" won't do it; leave off the second asterisk.

Like Jessa Flint above, I didn't want to manually edit .vs\config\applicationhost.config because I wanted the changes to persist in source control. I also didn't want to have a separate batch file. I'm using VS 2015.

https://i.stack.imgur.com/maVFN.png

::The following configures IIS Express to bind to any address at the specified port

::remove binding if it already exists
"%programfiles%\IIS Express\appcmd.exe" set site "MySolution.Web" /-bindings.[protocol='http',bindingInformation='*:1167:'] /apphostconfig:"$(SolutionDir).vs\config\applicationhost.config"

::add the binding
"%programfiles%\IIS Express\appcmd.exe" set site "MySolution.Web" /+bindings.[protocol='http',bindingInformation='*:1167:'] /apphostconfig:"$(SolutionDir).vs\config\applicationhost.config"

Just make sure you change the port number to your desired port.

I was trying to integrate the public IP Address into my workflow and these answers didn't help (I like to use the IDE as the IDE). But the above lead me to the solution (after about 2 hours of beating my head against a wall to get this to integrate with Visual Studio 2012 / Windows 8) here's what ended up working for me.

applicationhost.config generated by VisualStudio under C:\Users\usr\Documents\IISExpress\config

    <site name="MySite" id="1">
        <application path="/" applicationPool="Clr4IntegratedAppPool">
            <virtualDirectory path="/" physicalPath="C:\Users\usr\Documents\Visual Studio 2012\Projects\MySite" />
        </application>
        <bindings>
            <binding protocol="http" bindingInformation="*:8081:localhost" />
            <binding protocol="http" bindingInformation="*:8082:localhost" />
            <binding protocol="http" bindingInformation="*:8083:192.168.2.102" />
        </bindings>
    </site>

Set IISExpress to run as Administrator so that it can bind to outside addresses (not local host)

Run Visual Stuio as an Administrator so that it can start the process as an administrator allowing the binding to take place.

The net result is you can browse to 192.168.2.102 in my case and test (for instance in an Android emulator. I really hope this helps someone else as this was definitely an irritating process for me.

Apparently it is a security feature which I'd love to see disabled.

The up-voted answer is valid.. and this information helped me quite a bit. I know this topic has been discussed before but I wanted to add some additional input. People are saying that you must "manually edit" the application.config file in the Users IISExpress/Config directory. This was a big issue for me because I wanted to distribute the configuration via Source control to various developers.

What I found is that you can automate the updating of this file using the "C:\Program Files\IIS Express\appcmd.exe" program. It took a while to find out the control parameters but Ill share my findings here. Essentially you can make a .bat file that runs both the NETSH command and the APPCMD.EXE (and perhaps swap out a host file if you like) to make host header configuration easy with IIS Express.

Your install bat file would look something like this:

netsh http add urlacl url=http://yourcustomdomain.com:80/ user=everyone 

"C:\Program Files\IIS Express\appcmd.exe" set site "MyApp.Web" /+bindings.[protocol='http',bindingInformation='*:80:yourcustomdomain.com']

I also will make a "Uninstall" bat file that will clean up these bindings..(because often times Im just faking out DNS so that I can work on code that is host name sensitive)

netsh http delete urlacl url=http://yourcustomdomain.com:80/

"C:\Program Files\IIS Express\appcmd.exe" set site "MyApp.Web" /-bindings.[protocol='http',bindingInformation='*:80:yourcustomdomain.com']

I hope this information is helpful to someone.. It took me a bit to uncover.

This method has been tested and worked with ASP.NET Core 3.1 and Visual Studio 2019.

.vs\PROJECTNAME\config\applicationhost.config

Change "*:44320:localhost" to "*:44320:*".

<bindings>
    <binding protocol="http" bindingInformation="*:5737:localhost" />
    <binding protocol="https" bindingInformation="*:44320:*" />
</bindings>

Both links work:

https://localhost:44320

https://127.0.0.1:44320

Now if you want the app to work with the custom domain, just add the following line to the host file:

C:\Windows\System32\drivers\etc\hosts

127.0.0.1 customdomain

Now:

https://customdomain:44320

NOTE: If your app works without SSL, change the protocol="http" part.

Following Jaro's advice, I was able to get this working under Windows XP and IIS Express (installed via Web Matrix) with a small modification and was not limited to only localhost. It's just a matter of setting the bindings correctly.

Use WebMatrix to create a new site from folder in your web application root. Close WebMatrix. Open %USERPROFILE%\My Documents\IISExpress\config\applicationhost.config (Windows XP. Vista and 7 paths will be similar) and edit the site definition in the config block to be along the lines of the following:

If running MVC, then keep the applicationPool set to one of the "Integrated" options.

David's solution is good. But I found the <script>alert(document.domain);</script> in the page still alerts "localhost" because the Project Url is still localhost even if it has been override with http://dev.example.com. Another issue I run into is that it alerts me the port 80 has already been in use even if I have disabled the Skype using the 80 port number as recommended by David Murdoch. So I have figured out another solution that is much easier:

Run Notepad as administrator, and open the C:\Windows\System32\drivers\etc\hosts, add 127.0.0.1 mydomain, and save the file; Open the web project with Visual Studio 2013 (Note: must also run as administrator), right-click the project -> Properties -> Web, (lets suppose the Project Url under the "IIS Express" option is http://localhost:33333/), then change it from http://localhost:33333/ to http://mydomain:333333/ Note: After this change, you should neither click the "Create Virtual Directory" button on the right of the Project Url box nor click the Save button of the Visual Studio as they won't be succeeded. You can save your settings after next step 3. Open %USERPROFILE%\My Documents\IISExpress\config\applicationhost.config, search for "33333:localhost", then update it to "33333:mydomain" and save the file. Save your setting as mentioned in step 2. Right click a web page in your visual studio, and click "View in Browser". Now the page will be opened under http://mydomain:333333/, and in the page will alert "mydomain".

Note: The port number listed above is assumed to be 33333. You need to change it to the port number set by your visual studio.

Post edited: Today I tried with another domain name and got the following error: Unable to launch the IIS Express Web server. Failed to register URL... Access is denied. (0x80070005). I exit the IIS Express by right clicking the IIS Express icon at the right corner in the Windows task bar, and then re-start my visual studio as administrator, and the issue is gone.

I tried all of above, nothing worked. What resolved the issue was adding IPv6 bindings in the hosts file. In step 5 of @David Murdochs answer, add two lines instead of one, i.e.:

127.0.0.1 dev.example.com
::1 dev.example.com

I figured it out by checking $ ping localhost from command line, which used to return:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Instead, it now returns:

Reply from ::1: time<1ms

I don't know why, but for some reason IIS Express started using IPv6 instead of IPv4.

Just in case if someone may need...

My requirement was:

SSL enabled

Custom domain

Running in (default) port: 443

Setup this URL in IISExpress: http://my.customdomain.com

To setup this I used following settings:

Project Url: http://localhost:57400

Start URL: http://my.customdomain.com

/.vs/{solution-name}/config/applicationhost.config settings:

<site ...>
    <application>
        ...
    </application>
    <bindings>
        <binding protocol="http" bindingInformation="*:57400:" />
        <binding protocol="https" bindingInformation="*:443:my.customdomain.com" />
    </bindings>
</site>

I was using iisexpress-proxy (from npm) for this.

https://github.com/icflorescu/iisexpress-proxy

Leaving this here just in case anyone needs...

I needed to have custom domains for a Wordpress Multisite setup in IIS Express but nothing worked until I ran Webmatrix/Visual Studio as an Administrator. Then I was able to bind subdomains to the same application.

<bindings> 
    <binding protocol="http" bindingInformation="*:12345:localhost" />
    <binding protocol="http" bindingInformation="*:12345:whatever.localhost" />
</bindings>

Then going to http://whatever.localhost:12345/ will run.