How to get current value of RxJS Subject or Observable?

A Subject or Observable doesn't have a current value. When a value is emitted, it is passed to subscribers and the Observable is done with it.

If you want to have a current value, use BehaviorSubject which is designed for exactly that purpose. BehaviorSubject keeps the last emitted value and emits it immediately to new subscribers.

It also has a method getValue() to get the current value.

---

The only way you should be getting values "out of" an Observable/Subject is with subscribe!

If you're using getValue() you're doing something imperative in declarative paradigm. It's there as an escape hatch, but 99.9% of the time you should NOT use getValue(). There are a few interesting things that getValue() will do: It will throw an error if the subject has been unsubscribed, it will prevent you from getting a value if the subject is dead because it's errored, etc. But, again, it's there as an escape hatch for rare circumstances.

There are several ways of getting the latest value from a Subject or Observable in a "Rx-y" way:

Using BehaviorSubject: But actually subscribing to it. When you first subscribe to BehaviorSubject it will synchronously send the previous value it received or was initialized with. Using a ReplaySubject(N): This will cache N values and replay them to new subscribers. A.withLatestFrom(B): Use this operator to get the most recent value from observable B when observable A emits. Will give you both values in an array [a, b]. A.combineLatest(B): Use this operator to get the most recent values from A and B every time either A or B emits. Will give you both values in an array. shareReplay(): Makes an Observable multicast through a ReplaySubject, but allows you to retry the observable on error. (Basically it gives you that promise-y caching behavior). publishReplay(), publishBehavior(initialValue), multicast(subject: BehaviorSubject | ReplaySubject), etc: Other operators that leverage BehaviorSubject and ReplaySubject. Different flavors of the same thing, they basically multicast the source observable by funneling all notifications through a subject. You need to call connect() to subscribe to the source with the subject.

---

I had similar situation where late subscribers subscribe to the Subject after its value arrived.

I found ReplaySubject which is similar to BehaviorSubject works like a charm in this case. And here is a link to better explanation: http://reactivex.io/rxjs/manual/overview.html#replaysubject

---

const observable = of('response')

function hasValue(value: any) {
  return value !== null && value !== undefined;
}

function getValue<T>(observable: Observable<T>): Promise<T> {
  return observable
    .pipe(
      filter(hasValue),
      first()
    )
    .toPromise();
}

const result = await getValue(observable)
// Do the logic with the result
// .................
// .................
// .................

You can check the full article on how to implement it from here. https://www.imkrish.com/blog/development/simple-way-get-value-from-observable

---

I encountered the same problem in child components where initially it would have to have the current value of the Subject, then subscribe to the Subject to listen to changes. I just maintain the current value in the Service so it is available for components to access, e.g. :

import {Storage} from './storage';
import {Injectable} from 'angular2/core';
import {Subject}    from 'rxjs/Subject';

@Injectable()
export class SessionStorage extends Storage {

  isLoggedIn: boolean;

  private _isLoggedInSource = new Subject<boolean>();
  isLoggedIn = this._isLoggedInSource.asObservable();
  constructor() {
    super('session');
    this.currIsLoggedIn = false;
  }
  setIsLoggedIn(value: boolean) {
    this.setItem('_isLoggedIn', value, () => {
      this._isLoggedInSource.next(value);
    });
    this.isLoggedIn = value;
  }
}

A component that needs the current value could just then access it from the service, i.e,:

sessionStorage.isLoggedIn

Not sure if this is the right practice :)

---

A similar looking answer was downvoted. But I think I can justify what I'm suggesting here for limited cases.

While it's true that an observable doesn't have a current value, very often it will have an immediately available value. For example with redux / flux / akita stores you may request data from a central store, based on a number of observables and that value will generally be immediately available.

If this is the case then when you subscribe, the value will come back immediately.

So let's say you had a call to a service, and on completion you want to get the latest value of something from your store, that potentially might not emit:

You might try to do this (and you should as much as possible keep things 'inside pipes'):

 serviceCallResponse$.pipe(withLatestFrom(store$.select(x => x.customer)))
                     .subscribe(([ serviceCallResponse, customer] => {

                        // we have serviceCallResponse and customer 
                     });

The problem with this is that it will block until the secondary observable emits a value, which potentially could be never.

I found myself recently needing to evaluate an observable only if a value was immediately available, and more importantly I needed to be able to detect if it wasn't. I ended up doing this:

 serviceCallResponse$.pipe()
                     .subscribe(serviceCallResponse => {

                        // immediately try to subscribe to get the 'available' value
                        // note: immediately unsubscribe afterward to 'cancel' if needed
                        let customer = undefined;

                        // whatever the secondary observable is
                        const secondary$ = store$.select(x => x.customer);

                        // subscribe to it, and assign to closure scope
                        sub = secondary$.pipe(take(1)).subscribe(_customer => customer = _customer);
                        sub.unsubscribe();

                        // if there's a delay or customer isn't available the value won't have been set before we get here
                        if (customer === undefined) 
                        {
                           // handle, or ignore as needed
                           return throwError('Customer was not immediately available');
                        }
                     });

Note that for all of the above I'm using subscribe to get the value (as @Ben discusses). Not using a .value property, even if I had a BehaviorSubject.

---

Although it may sound overkill, this is just another "possible" solution to keep Observable type and reduce boilerplate...

You could always create an extension getter to get the current value of an Observable.

To do this you would need to extend the Observable<T> interface in a global.d.ts typings declaration file. Then implement the extension getter in a observable.extension.ts file and finally include both typings and extension file to your application.

You can refer to this StackOverflow Answer to know how to include the extensions into your Angular application.

// global.d.ts
declare module 'rxjs' {
  interface Observable<T> {
    /**
     * _Extension Method_ - Returns current value of an Observable.
     * Value is retrieved using _first()_ operator to avoid the need to unsubscribe.
     */
    value: Observable<T>;
  }
}

// observable.extension.ts
Object.defineProperty(Observable.prototype, 'value', {
  get <T>(this: Observable<T>): Observable<T> {
    return this.pipe(
      filter(value => value !== null && value !== undefined),
      first());
  },
});

// using the extension getter example
this.myObservable$.value
  .subscribe(value => {
    // whatever code you need...
  });

---

There are two ways you can achieve this.

BehaviorSubject has a method getValue() which you can get the value in a specific point of time. You can subscribe directly with the BehaviorSubject and you may pass the subscribed value to a class member, field or property.

I wouldn't recommend both approaches.

In the first approach, it's a convenient method you can get the value anytime, you may refer to this as the current snapshot at that point of time. Problem with this is you can introduce race conditions in your code, you may invoke this method in many different places and in different timing which is hard to debug.

The second approach is what most developers employ when they want a raw value upon subscription, you can track the subscription and when do you exactly unsubscribe to avoid further memory leak, you may use this if you're really desperate to bind it to a variable and there's no other ways to interface it.

I would recommend, looking again at your use cases, where do you use it? For example you want to determine if the user is logged in or not when you call any API, you can combine it other observables:

const data$ = apiRequestCall$().pipe(
 // Latest snapshot from BehaviorSubject.
 withLatestFrom(isLoggedIn),
 // Allow call only if logged in.
 filter(([request, loggedIn]) => loggedIn)
 // Do something else..
);

With this, you may use it directly to the UI by piping data$ | async in case of angular.

---

A subscription can be created, then after taking the first emitted item, destroyed. In the example below, pipe() is a function that uses an Observable as its input and returns another Observable as its output, while not modifying the first observable.

Sample created with Angular 8.1.0 packages "rxjs": "6.5.3", "rxjs-observable": "0.0.7"

  ngOnInit() {

    ...

    // If loading with previously saved value
    if (this.controlValue) {

      // Take says once you have 1, then close the subscription
      this.selectList.pipe(take(1)).subscribe(x => {
        let opt = x.find(y => y.value === this.controlValue);
        this.updateValue(opt);
      });

    }
  }

---

You could store the last emitted value separately from the Observable. Then read it when needed.

let lastValue: number;

const subscription = new Service().start();
subscription
    .subscribe((data) => {
        lastValue = data;
    }
);

---

The best way to do this is using Behaviur Subject, here is an example:

var sub = new rxjs.BehaviorSubject([0, 1])
sub.next([2, 3])
setTimeout(() => {sub.next([4, 5])}, 1500)
sub.subscribe(a => console.log(a)) //2, 3 (current value) -> wait 2 sec -> 4, 5

---