Ruby / Rails - Change the timezone of a Time, without changing the value

Sounds like you want something along the lines of

ActiveSupport::TimeZone.new('America/New_York').local_to_utc(t)

This says convert this local time (using the zone) to utc. If you have Time.zone set then you can of course to

Time.zone.local_to_utc(t)

This won't use the timezone attached to t - it assumes that it's local to the time zone you are converting from.

One edge case to guard against here is DST transitions: the local time you specify may not exist or may be ambiguous.

I've just faced the same problem and here is what I'm going to do:

t = t.asctime.in_time_zone("America/New_York")

Here is the documentation on asctime

If you're using Rails, here is another method along the lines of Eric Walsh's answer:

def set_in_timezone(time, zone)
  Time.use_zone(zone) { time.to_datetime.change(offset: Time.zone.now.strftime("%z")) }
end

You need to add the time offset to your time after you convert it.

The easiest way to do this is:

t = Foo.start_time.in_time_zone("America/New_York")
t -= t.utc_offset

I am not sure why you would want to do this, though it is probably best to actually work with times the way they are built. I guess some background on why you need to shift time and timezones would be helpful.

Actually, I think you need to subtract the offset after you convert it, as in:

1.9.3p194 :042 > utc_time = Time.now.utc
=> 2013-05-29 16:37:36 UTC
1.9.3p194 :043 > local_time = utc_time.in_time_zone('America/New_York')
 => Wed, 29 May 2013 12:37:36 EDT -04:00
1.9.3p194 :044 > desired_time = local_time-local_time.utc_offset
 => Wed, 29 May 2013 16:37:36 EDT -04:00 

Depends on where you are going to use this Time.

When your time is an attribute

If time is used as an attribute, you can use the same date_time_attribute gem:

class Task
  include DateTimeAttribute
  date_time_attribute :due_at
end

task = Task.new
task.due_at_time_zone = 'Moscow'
task.due_at                      # => Mon, 03 Feb 2013 22:00:00 MSK +04:00
task.due_at_time_zone = 'London'
task.due_at                      # => Mon, 03 Feb 2013 22:00:00 GMT +00:00

When you set a separate variable

Use the same date_time_attribute gem:

my_date_time = DateTimeAttribute::Container.new(Time.zone.now)
my_date_time.date_time           # => 2001-02-03 22:00:00 KRAT +0700
my_date_time.time_zone = 'Moscow'
my_date_time.date_time           # => 2001-02-03 22:00:00 MSK +0400

Here's another version that worked better for me than the current answers:

now = Time.now
# => 2020-04-15 12:07:10 +0200
now.strftime("%F %T.%N").in_time_zone("Europe/London")
# => Wed, 15 Apr 2020 12:07:10 BST +01:00

It carries over nanoseconds using "%N". If you desire another precision, see this strftime reference.

The question's about Rails but it seems, like me, not everyone here is on the ActiveSupport train, so yet another option:

irb(main):001:0> require "time"
=> true
irb(main):003:0> require "tzinfo"
=> true
irb(main):004:0> t = Time.parse("2000-01-01 14:20:00 UTC")
=> 2000-01-01 14:20:00 UTC
irb(main):005:0> tz = TZInfo::Timezone.get("America/New_York")
=> #<TZInfo::DataTimezone: America/New_York>
irb(main):008:0> utc = tz.local_to_utc(t)
=> 2000-01-01 19:20:00 UTC
irb(main):009:0> tz.utc_to_local(utc)
=> 2000-01-01 14:20:00 -0500
irb(main):010:0> 

local_to_utc not doing the opposite of utc_to_local might look like a bug but it is at least documented: https://github.com/tzinfo/tzinfo says:

The offset of the time is ignored - it is treated as if it were a local time for the time zone

def relative_time_in_time_zone(time, zone)
   DateTime.parse(time.strftime("%d %b %Y %H:%M:%S #{time.in_time_zone(zone).formatted_offset}"))
end

Quick little function I came up with to solve the job. If someone has a more efficient way of doing this please post it!

I spent significant time struggling with TimeZones as well, and after tinkering with Ruby 1.9.3 realized that you don't need to convert to a named timezone symbol before converting:

my_time = Time.now
west_coast_time = my_time.in_time_zone(-8) # Pacific Standard Time
east_coast_time = my_time.in_time_zone(-5) # Eastern Standard Time

What this implies is that you can focus on getting the appropriate time setup first in the region you want, the way you would think about it (at least in my head I partition it this way), and then convert at the end to the zone you want to verify your business logic with.

This also works for Ruby 2.3.1.

I have created few helper methods one of which just does the same thing as is asked by the original author of the post at Ruby / Rails - Change the timezone of a Time, without changing the value.

Also I have documented few peculiarities I observed and also these helpers contains methods to completely ignore automatic day-light savings applicable while time-conversions which is not available out-of-the-box in Rails framework:

  def utc_offset_of_given_time(time, ignore_dst: false)
    # Correcting the utc_offset below
    utc_offset = time.utc_offset

    if !!ignore_dst && time.dst?
      utc_offset_ignoring_dst = utc_offset - 3600 # 3600 seconds = 1 hour
      utc_offset = utc_offset_ignoring_dst
    end

    utc_offset
  end

  def utc_offset_of_given_time_ignoring_dst(time)
    utc_offset_of_given_time(time, ignore_dst: true)
  end

  def change_offset_in_given_time_to_given_utc_offset(time, utc_offset)
    formatted_utc_offset = ActiveSupport::TimeZone.seconds_to_utc_offset(utc_offset, false)

    # change method accepts :offset option only on DateTime instances.
    # and also offset option works only when given formatted utc_offset
    # like -0500. If giving it number of seconds like -18000 it is not
    # taken into account. This is not mentioned clearly in the documentation
    # , though.
    # Hence the conversion to DateTime instance first using to_datetime.
    datetime_with_changed_offset = time.to_datetime.change(offset: formatted_utc_offset)

    Time.parse(datetime_with_changed_offset.to_s)
  end

  def ignore_dst_in_given_time(time)
    return time unless time.dst?

    utc_offset = time.utc_offset

    if utc_offset < 0
      dst_ignored_time = time - 1.hour
    elsif utc_offset > 0
      dst_ignored_time = time + 1.hour
    end

    utc_offset_ignoring_dst = utc_offset_of_given_time_ignoring_dst(time)

    dst_ignored_time_with_corrected_offset =
      change_offset_in_given_time_to_given_utc_offset(dst_ignored_time, utc_offset_ignoring_dst)

    # A special case for time in timezones observing DST and which are
    # ahead of UTC. For e.g. Tehran city whose timezone is Iran Standard Time
    # and which observes DST and which is UTC +03:30. But when DST is active
    # it becomes UTC +04:30. Thus when a IRDT (Iran Daylight Saving Time)
    # is given to this method say '05-04-2016 4:00pm' then this will convert
    # it to '05-04-2016 5:00pm' and update its offset to +0330 which is incorrect.
    # The updated UTC offset is correct but the hour should retain as 4.
    if utc_offset > 0
      dst_ignored_time_with_corrected_offset -= 1.hour
    end

    dst_ignored_time_with_corrected_offset
  end

Examples which can be tried on rails console or a ruby script after wrapping the above methods in a class or module:

dd1 = '05-04-2016 4:00pm'
dd2 = '07-11-2016 4:00pm'

utc_zone = ActiveSupport::TimeZone['UTC']
est_zone = ActiveSupport::TimeZone['Eastern Time (US & Canada)']
tehran_zone = ActiveSupport::TimeZone['Tehran']

utc_dd1 = utc_zone.parse(dd1)
est_dd1 = est_zone.parse(dd1)
tehran_dd1 = tehran_zone.parse(dd1)

utc_dd1.dst?
est_dd1.dst?
tehran_dd1.dst?

ignore_dst = true
utc_to_est_time = utc_dd1.in_time_zone(est_zone.name)
if utc_to_est_time.dst? && !!ignore_dst
  utc_to_est_time = ignore_dst_in_given_time(utc_to_est_time)
end

puts utc_to_est_time

Hope this helps.

This worked well for me

date = '23/11/2020'
time = '08:00'
h, m = time.split(':')
timezone = 'Europe/London'

date.to_datetime.in_time_zone(timezone).change(hour: h, min: m)