Difference between volatile and synchronized in Java

It's important to understand that there are two aspects to thread safety.

execution control, and memory visibility

The first has to do with controlling when code executes (including the order in which instructions are executed) and whether it can execute concurrently, and the second to do with when the effects in memory of what has been done are visible to other threads. Because each CPU has several levels of cache between it and main memory, threads running on different CPUs or cores can see "memory" differently at any given moment in time because threads are permitted to obtain and work on private copies of main memory.

Using synchronized prevents any other thread from obtaining the monitor (or lock) for the same object, thereby preventing all code blocks protected by synchronization on the same object from executing concurrently. Synchronization also creates a "happens-before" memory barrier, causing a memory visibility constraint such that anything done up to the point some thread releases a lock appears to another thread subsequently acquiring the same lock to have happened before it acquired the lock. In practical terms, on current hardware, this typically causes flushing of the CPU caches when a monitor is acquired and writes to main memory when it is released, both of which are (relatively) expensive.

Using volatile, on the other hand, forces all accesses (read or write) to the volatile variable to occur to main memory, effectively keeping the volatile variable out of CPU caches. This can be useful for some actions where it is simply required that visibility of the variable be correct and order of accesses is not important. Using volatile also changes treatment of long and double to require accesses to them to be atomic; on some (older) hardware this might require locks, though not on modern 64 bit hardware. Under the new (JSR-133) memory model for Java 5+, the semantics of volatile have been strengthened to be almost as strong as synchronized with respect to memory visibility and instruction ordering (see http://www.cs.umd.edu/users/pugh/java/memoryModel/jsr-133-faq.html#volatile). For the purposes of visibility, each access to a volatile field acts like half a synchronization.

Under the new memory model, it is still true that volatile variables cannot be reordered with each other. The difference is that it is now no longer so easy to reorder normal field accesses around them. Writing to a volatile field has the same memory effect as a monitor release, and reading from a volatile field has the same memory effect as a monitor acquire. In effect, because the new memory model places stricter constraints on reordering of volatile field accesses with other field accesses, volatile or not, anything that was visible to thread A when it writes to volatile field f becomes visible to thread B when it reads f. -- JSR 133 (Java Memory Model) FAQ

So, now both forms of memory barrier (under the current JMM) cause an instruction re-ordering barrier which prevents the compiler or run-time from re-ordering instructions across the barrier. In the old JMM, volatile did not prevent re-ordering. This can be important, because apart from memory barriers the only limitation imposed is that, for any particular thread, the net effect of the code is the same as it would be if the instructions were executed in precisely the order in which they appear in the source.

One use of volatile is for a shared but immutable object is recreated on the fly, with many other threads taking a reference to the object at a particular point in their execution cycle. One needs the other threads to begin using the recreated object once it is published, but does not need the additional overhead of full synchronization and it's attendant contention and cache flushing.

// Declaration
public class SharedLocation {
    static public SomeObject someObject=new SomeObject(); // default object
    }

// Publishing code
// Note: do not simply use SharedLocation.someObject.xxx(), since although
//       someObject will be internally consistent for xxx(), a subsequent 
//       call to yyy() might be inconsistent with xxx() if the object was 
//       replaced in between calls.
SharedLocation.someObject=new SomeObject(...); // new object is published

// Using code
private String getError() {
    SomeObject myCopy=SharedLocation.someObject; // gets current copy
    ...
    int cod=myCopy.getErrorCode();
    String txt=myCopy.getErrorText();
    return (cod+" - "+txt);
    }
// And so on, with myCopy always in a consistent state within and across calls
// Eventually we will return to the code that gets the current SomeObject.

Speaking to your read-update-write question, specifically. Consider the following unsafe code:

public void updateCounter() {
    if(counter==1000) { counter=0; }
    else              { counter++; }
    }

Now, with the updateCounter() method unsynchronized, two threads may enter it at the same time. Among the many permutations of what could happen, one is that thread-1 does the test for counter==1000 and finds it true and is then suspended. Then thread-2 does the same test and also sees it true and is suspended. Then thread-1 resumes and sets counter to 0. Then thread-2 resumes and again sets counter to 0 because it missed the update from thread-1. This can also happen even if thread switching does not occur as I have described, but simply because two different cached copies of counter were present in two different CPU cores and the threads each ran on a separate core. For that matter, one thread could have counter at one value and the other could have counter at some entirely different value just because of caching.

What's important in this example is that the variable counter was read from main memory into cache, updated in cache and only written back to main memory at some indeterminate point later when a memory barrier occurred or when the cache memory was needed for something else. Making the counter volatile is insufficient for thread-safety of this code, because the test for the maximum and the assignments are discrete operations, including the increment which is a set of non-atomic read+increment+write machine instructions, something like:

MOV EAX,counter
INC EAX
MOV counter,EAX

Volatile variables are useful only when all operations performed on them are "atomic", such as my example where a reference to a fully formed object is only read or written (and, indeed, typically it's only written from a single point). Another example would be a volatile array reference backing a copy-on-write list, provided the array was only read by first taking a local copy of the reference to it.

---

volatile is a field modifier, while synchronized modifies code blocks and methods. So we can specify three variations of a simple accessor using those two keywords: int i1; int geti1() {return i1;} volatile int i2; int geti2() {return i2;} int i3; synchronized int geti3() {return i3;} geti1() accesses the value currently stored in i1 in the current thread. Threads can have local copies of variables, and the data does not have to be the same as the data held in other threads.In particular, another thread may have updated i1 in it's thread, but the value in the current thread could be different from that updated value. In fact Java has the idea of a "main" memory, and this is the memory that holds the current "correct" value for variables. Threads can have their own copy of data for variables, and the thread copy can be different from the "main" memory. So in fact, it is possible for the "main" memory to have a value of 1 for i1, for thread1 to have a value of 2 for i1 and for thread2 to have a value of 3 for i1 if thread1 and thread2 have both updated i1 but those updated value has not yet been propagated to "main" memory or other threads. On the other hand, geti2() effectively accesses the value of i2 from "main" memory. A volatile variable is not allowed to have a local copy of a variable that is different from the value currently held in "main" memory. Effectively, a variable declared volatile must have it's data synchronized across all threads, so that whenever you access or update the variable in any thread, all other threads immediately see the same value. Generally volatile variables have a higher access and update overhead than "plain" variables. Generally threads are allowed to have their own copy of data is for better efficiency. There are two differences between volitile and synchronized. Firstly synchronized obtains and releases locks on monitors which can force only one thread at a time to execute a code block. That's the fairly well known aspect to synchronized. But synchronized also synchronizes memory. In fact synchronized synchronizes the whole of thread memory with "main" memory. So executing geti3() does the following: The thread acquires the lock on the monitor for object this . The thread memory flushes all its variables, i.e. it has all of its variables effectively read from "main" memory . The code block is executed (in this case setting the return value to the current value of i3, which may have just been reset from "main" memory). (Any changes to variables would normally now be written out to "main" memory, but for geti3() we have no changes.) The thread releases the lock on the monitor for object this. So where volatile only synchronizes the value of one variable between thread memory and "main" memory, synchronized synchronizes the value of all variables between thread memory and "main" memory, and locks and releases a monitor to boot. Clearly synchronized is likely to have more overhead than volatile.

http://javaexp.blogspot.com/2007/12/difference-between-volatile-and.html

---

There are 3 main issues with multithreading:

Race Conditions Caching / stale memory Compiler and CPU optimisations

volatile can solve 2 & 3, but can't solve 1. synchronized/explicit locks can solve 1, 2 & 3.

Elaboration:

Consider this thread unsafe code:

x++;

While it may look like one operation, it's actually 3: reading the current value of x from memory, adding 1 to it, and saving it back to memory. If few threads try to do it at the same time, the result of the operation is undefined. If x originally was 1, after 2 threads operating the code it may be 2 and it may be 3, depending on which thread completed which part of the operation before control was transferred to the other thread. This is a form of race condition.

Using synchronized on a block of code makes it atomic - meaning it make it as if the 3 operations happen at once, and there's no way for another thread to come in the middle and interfere. So if x was 1, and 2 threads try to preform x++ we know in the end it will be equal to 3. So it solves the race condition problem.

synchronized (this) {
   x++; // no problem now
}

Marking x as volatile does not make x++; atomic, so it doesn't solve this problem.

In addition, threads have their own context - i.e. they can cache values from main memory. That means that a few threads can have copies of a variable, but they operate on their working copy without sharing the new state of the variable among other threads.

Consider that on one thread, x = 10;. And somewhat later, in another thread, x = 20;. The change in value of x might not appear in the first thread, because the other thread has saved the new value to its working memory, but hasn't copied it to the main memory. Or that it did copy it to the main memory, but the first thread hasn't updated its working copy. So if now the first thread checks if (x == 20) the answer will be false.

Marking a variable as volatile basically tells all threads to do read and write operations on main memory only. synchronized tells every thread to go update their value from main memory when they enter the block, and flush the result back to main memory when they exit the block.

Note that unlike data races, stale memory is not so easy to (re)produce, as flushes to main memory occur anyway.

The complier and CPU can (without any form of synchronization between threads) treat all code as single threaded. Meaning it can look at some code, that is very meaningful in a multithreading aspect, and treat it as if it’s single threaded, where it’s not so meaningful. So it can look at a code and decide, in sake of optimisation, to reorder it, or even remove parts of it completely, if it doesn’t know that this code is designed to work on multiple threads.

Consider the following code:

boolean b = false;
int x = 10;

void threadA() {
    x = 20;
    b = true;
}

void threadB() {
    if (b) {
        System.out.println(x);
    }
}

You would think that threadB could only print 20 (or not print anything at all if threadB if-check is executed before setting b to true), as b is set to true only after x is set to 20, but the compiler/CPU might decide to reorder threadA, in that case threadB could also print 10. Marking b as volatile ensures that it won’t be reordered (or discarded in certain cases). Which mean threadB could only print 20 (or nothing at all). Marking the methods as syncrhonized will achieve the same result. Also marking a variable as volatile only ensures that it won’t get reordered, but everything before/after it can still be reordered, so synchronization can be more suited in some scenarios.

Note that before Java 5 New Memory Model, volatile didn’t solve this issue.

---

synchronized is method level/block level access restriction modifier. It will make sure that one thread owns the lock for critical section. Only the thread,which own a lock can enter synchronized block. If other threads are trying to access this critical section, they have to wait till current owner releases the lock.

volatile is variable access modifier which forces all threads to get latest value of the variable from main memory. No locking is required to access volatile variables. All threads can access volatile variable value at same time.

A good example to use volatile variable : Date variable.

Assume that you have made Date variable volatile. All the threads, which access this variable always get latest data from main memory so that all threads show real (actual) Date value. You don't need different threads showing different time for same variable. All threads should show right Date value.

https://i.stack.imgur.com/iGYDx.png

Have a look at this article for better understanding of volatile concept.

Lawrence Dol cleary explained your read-write-update query.

Regarding your other queries

When is it more suitable to declare variables volatile than access them through synchronized?

You have to use volatile if you think all threads should get actual value of the variable in real time like the example I have explained for Date variable.

Is it a good idea to use volatile for variables that depend on input?

Answer will be same as in first query.

Refer to this article for better understanding.

---