Assertion failure in dequeueReusableCellWithIdentifier:forIndexPath:

You're using the dequeueReusableCellWithIdentifier:forIndexPath: method. The documentation for that method says this:

Important: You must register a class or nib file using the registerNib:forCellReuseIdentifier: or registerClass:forCellReuseIdentifier: method before calling this method.

You didn't register a nib or a class for the reuse identifier "Cell".

Looking at your code, you seem to expect the dequeue method to return nil if it doesn't have a cell to give you. You need to use the dequeueReusableCellWithIdentifier: for that behavior:

UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];

Notice that dequeueReusableCellWithIdentifier: and dequeueReusableCellWithIdentifier:forIndexPath: are different methods. See doc for the former and the latter.

If you want to understand why you'd want to ever use dequeueReusableCellWithIdentifier:forIndexPath:, check out this Q&A.

---

I think this error is about registering your nib or class for the identifier.

So that you may keep what you are doing in your tableView:cellForRowAtIndexPath function and just add code below into your viewDidLoad:

[self.tableView registerClass:[UITableViewCell class] forCellReuseIdentifier:@"Cell"];

It's worked for me. Hope it may help.

---

Although this question is fairly old, there is another possibility: If you are using Storyboards, you simply have to set the CellIdentifier in the Storyboard.

https://i.stack.imgur.com/uBGUN.png

Make sure to clean your build after doing so. XCode sometimes has some issues with Storyboard updates

---

i had the same problem replacing with

static NSString *CellIdentifier = @"Cell";
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier];

   if (cell==nil) {
        cell = [[UITableViewCell alloc]initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:CellIdentifier];

    }

solved

---

The problem is most likely because you config custom UITableViewCell in storyboard but you do not use storyboard to instantiate your UITableViewController which uses this UITableViewCell. For example, in MainStoryboard, you have a UITableViewController subclass called MyTableViewController and have a custom dynamic UITableViewCell called MyTableViewCell with identifier id "MyCell".

If you create your custom UITableViewController like this:

 MyTableViewController *myTableViewController = [[MyTableViewController alloc] init];

It will not automatically register your custom tableviewcell for you. You have to manually register it.

But if you use storyboard to instantiate MyTableViewController, like this:

UIStoryboard *storyboard = [UIStoryboard storyboardWithName:@"MainStoryboard" bundle:nil];
MyTableViewController *myTableViewController = [storyboard  instantiateViewControllerWithIdentifier:@"MyTableViewController"];

Nice thing happens! UITableViewController will automatically register your custom tableview cell that you define in storyboard for you.

In your delegate method "cellForRowAtIndexPath", you can create you table view cell like this :

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
static NSString *CellIdentifier = @"MyCell";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier forIndexPath:indexPath];

//Configure your cell here ...

return cell;
}

dequeueReusableCellWithIdentifier will automatically create new cell for you if there is not reusable cell available in the recycling queue.

Then you are done!

---

I'll just add that Xcode 4.5 includes the new dequeueReusableCellWithIdentifier:forIndexPath:
in its default template code - a potential gotcha for developers expecting the older dequeueReusableCellWithIdentifier: method.

---

In your storyboard you should set the 'Identifier' of your prototype cell to be the same as your CellReuseIdentifier "Cell". Then you won't get that message or need to call that registerClass: function.

---

Swift 2.0 solution:

You need to go into your Attribute Inspector and add a name for your cells Identifier:

https://i.stack.imgur.com/Q9Miq.png

Then you need to make your identifier match with your dequeue like this:

let cell2 = tableView.dequeueReusableCellWithIdentifier("ButtonCell", forIndexPath: indexPath) as! ButtonCell

Alternatively

If you're working with a nib you may need to register your class in your cellForRowAtIndexPath:

override func tableView(tableView: UITableView, cellForRowAtIndexPath indexPath: NSIndexPath) -> UITableViewCell {       

    tableView.registerClass(UITableViewCell.self, forCellReuseIdentifier: "SwitchCell")

    // included for context            
    let cell = tableView.dequeueReusableCellWithIdentifier("SwitchCell", forIndexPath:indexPath) as! SwitchCell

    //... continue    
}

Apples's UITableView Class Reference says:

Prior to dequeueing any cells, call this method or the registerNib:forCellReuseIdentifier: method to tell the table view how to create new cells. If a cell of the specified type is not currently in a reuse queue, the table view uses the provided information to create a new cell object automatically. If you previously registered a class or nib file with the same reuse identifier, the class you specify in the cellClass parameter replaces the old entry. You may specify nil for cellClass if you want to unregister the class from the specified reuse identifier.

Here's the code from Apples Swift 2.0 framework:

// Beginning in iOS 6, clients can register a nib or class for each cell.
// If all reuse identifiers are registered, use the newer -dequeueReusableCellWithIdentifier:forIndexPath: to guarantee that a cell instance is returned.
// Instances returned from the new dequeue method will also be properly sized when they are returned.

@available(iOS 5.0, *)
func registerNib(nib: UINib?, forCellReuseIdentifier identifier: String)

@available(iOS 6.0, *)
func registerClass(cellClass: AnyClass?, forCellReuseIdentifier identifier: String)

---

If you are going with Custom Static Cells just comment this method:

//- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
//    static NSString *CellIdentifier = @"notificationCell";
//    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier forIndexPath:indexPath];
//    return cell;
//}

and give the cells an identifier at "Attributes Inspector" in storyboard.

---

I give you the answer in both Objective C and Swift.Before that I want to say

If we use the dequeueReusableCellWithIdentifier:forIndexPath:,we must register a class or nib file using the registerNib:forCellReuseIdentifier: or registerClass:forCellReuseIdentifier: method before calling this method as Apple Documnetation Says

So we add registerNib:forCellReuseIdentifier: or registerClass:forCellReuseIdentifier:

Once we registered a class for the specified identifier and a new cell must be created, this method initializes the cell by calling its initWithStyle:reuseIdentifier: method. For nib-based cells, this method loads the cell object from the provided nib file. If an existing cell was available for reuse, this method calls the cell’s prepareForReuse method instead.

in viewDidLoad method we should register the cell

Objective C

OPTION 1:

[self.tableView registerClass:[UITableViewCell class] forCellReuseIdentifier:@"cell"];

OPTION 2:

[self.tableView registerNib:[UINib nibWithNibName:@"CustomCell" bundle:nil] forCellReuseIdentifier:@"cell"];

in above code nibWithNibName:@"CustomCell" give your nib name instead of my nib name CustomCell

SWIFT

OPTION 1:

tableView.registerClass(UITableViewCell.self, forCellReuseIdentifier: "cell")

OPTION 2:

tableView.registerNib(UINib(nibName: "NameInput", bundle: nil), forCellReuseIdentifier: "Cell") 

in above code nibName:"NameInput" give your nib name

---

Working with Swift 3.0:

override func viewDidLoad() {
super.viewDidLoad()

self.myList.register(UINib(nibName: "MyTableViewCell", bundle: nil), forCellReuseIdentifier: "Cell")
}



public func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
let cell = myList.dequeueReusableCell(withIdentifier: "Cell", for: indexPath as IndexPath) as! MyTableViewCell

return cell
}

---

I spent hours last night working out why my programmatically generated table crashed on [myTable setDataSource:self]; It was OK commenting out and popping up an empty table, but crashed every time I tried to reach the datasource;

I had the delegation set up in the h file: @interface myViewController : UIViewController

I had the data source code in my implementation and still BOOM!, crash every time! THANK YOU to "xxd" (nr 9): adding that line of code solved it for me! In fact I am launching a table from a IBAction button, so here is my full code:

    - (IBAction)tapButton:(id)sender {

    UIViewController* popoverContent = [[UIViewController alloc]init];

    UIView* popoverView = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 200, 300)];
    popoverView.backgroundColor = [UIColor greenColor];
    popoverContent.view = popoverView;

    //Add the table
    UITableView *table = [[UITableView alloc] initWithFrame:CGRectMake(0, 0, 200, 300)         style:UITableViewStylePlain];

   // NEXT THE LINE THAT SAVED MY SANITY Without it the program built OK, but crashed when      tapping the button!

    [table registerClass:[UITableViewCell class] forCellReuseIdentifier:@"Cell"];
    table.delegate=self;
    [table setDataSource:self];
    [popoverView addSubview:table];
    popoverContent.contentSizeForViewInPopover =
    CGSizeMake(200, 300);

    //create a popover controller
    popoverController3 = [[UIPopoverController alloc]
                          initWithContentViewController:popoverContent];
    CGRect popRect = CGRectMake(self.tapButton.frame.origin.x,
                                self.tapButton.frame.origin.y,
                                self.tapButton.frame.size.width,
                                self.tapButton.frame.size.height);


    [popoverController3 presentPopoverFromRect:popRect inView:self.view   permittedArrowDirections:UIPopoverArrowDirectionAny animated:YES];



   }


   #Table view data source in same m file

   - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView
   {
    NSLog(@"Sections in table");
    // Return the number of sections.
    return 1;
   }

   - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section 
  {
    NSLog(@"Rows in table");

    // Return the number of rows in the section.
    return myArray.count;
   }

   - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath    *)indexPath
    {
    static NSString *CellIdentifier = @"Cell";
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier forIndexPath:indexPath];

    NSString *myValue;

    //This is just some test array I created:
    myValue=[myArray objectAtIndex:indexPath.row];

    cell.textLabel.text=myValue;
    UIFont *myFont = [ UIFont fontWithName: @"Arial" size: 12.0 ];
    cell.textLabel.font  = myFont;

    return cell;
   }

By the way: the button must be linked up with as an IBAction and as a IBOutlet if you want to anchor the popover to it.

UIPopoverController *popoverController3 is declared in the H file directly after @interface between {}

---

FWIW, I got this same error when I forgot to set the cell identifier in the storyboard. If this is your issue then in the storyboard click the table view cell and set the cell identifier in the attributes editor. Make sure the cell identifier you set here is the same as

static NSString *CellIdentifier = @"YourCellIdenifier";

---

I had the same issue, was having the same error and for me it worked like this:

[self.tableView registerNib:[UINib nibWithNibName:CELL_NIB_HERE bundle: nil] forCellReuseIdentifier:CELL_IDENTIFIER_HERE];

Maybe it will be usefull for someone else.

---

I setup everything correctly in the Storyboard and did a clean build but kept getting the error " must register a nib or a class for the identifier or connect a prototype cell in a storyboard"

[self.tableView registerClass:[UITableViewCell class] forCellReuseIdentifier:@"Cell"];

Corrected the error but i'm still at a loss. I'm not using a 'custom cell', just a view with a tableview embeded. I have declared the viewcontroller as delegate and datasource and made sure the cell identifier matches in file. whats going on here?

---

This might seem stupid to some people but it got me. I was getting this error and the problem for me was that I was trying to use static cells but then dynamically add more stuff. If you are calling this method your cells need to be dynamic prototypes. Select the cell in storyboard and under the Attributes inspector, the very first thing says 'Content' and you should select dynamic prototypes not static.

---

https://i.stack.imgur.com/vVwra.png

---

Make sure that the CellIdentifier == identifier of the cell in a storyboard, both names are same. Hope this works for u

---

In my case, the crash happened when I calleddeselectRowAtIndexPath:

The line was [tableView deselectRowAtIndexPath:indexPath animated:YES];

Changing it to [self.tableView deselectRowAtIndexPath:indexPath animated:YES]; FIXED MY PROBLEM!

Hope this helps anyone

---

In Swift this problem can be solved by adding the following code in your

viewDidLoad

method.

tableView.registerClass(UITableViewCell.classForKeyedArchiver(), forCellReuseIdentifier: "your_reuse_identifier")

---

you have to be aware that when using interface builder and creating a Xib (nib) containing one cell that there is also a placeholder created that points to the class that will be used. Meaning, when you place two UITableViewCell in one Xib file you possibly run into the exact same trouble causing an *** Assertion failure .... The placeholder mechanism doesn't work adn will be confused then. Instead placing different placeholders in one Xib read on..

The most easy solution (even if that seems a bit to simple) is to place one Cell at a time in one Xib. IB will create a placeholder for you and all works as expected then. But this then leads directly to one extra line of code, because then you need to load the correct nib/xib asking for the reuseIdentified Cell where it resides in. So the following example code focuses the use of multiple Cell Indentifiers in one tableview where an Assertion Failure is very common.

// possibly above class implementation
static NSString *firstCellIdentifier = @"firstCellIdentifier";
static NSString *secondCellIdentifier = @"secondCellIdentifier";

// possibly in -(instancetype)init 
UINib *firstNib = [UINib nibWithNibName:@"FirstCell" bundle:nil];
[self.tableView registerNib:firstNib forCellReuseIdentifier:firstCellIdentifier];
UINib *secondNib = [UINib nibWithNibName:@"SecondCell" bundle:nil];
[self.tableView registerNib:secondNib forCellReuseIdentifier:secondCellIdentifier];

Another trouble with the use of two CellIdentifier's in one UITableView is that row height and/or section height have to be taken care of. Two cells can have different heights of course.

When registering classes for reuse the code should look different.

The "simple solution" looks also much different when your cells reside inside a Storyboard instead of Xib's. Watch out for the placeholders.

Keep also in mind that interface builder files have version wise variations and need to be set to a version that your targeted OS version supports. Even if you may be lucky that the particular feature you placed in your Xib is not changed since the last IB version and does not throw errors yet. So a Xib made with IB set to be compatible to iOS 13+ but used in a target that is compiled on an earlier version iOS 12.4 will cause also trouble and can end up with Assertion failure.

---

Ran into this error bc cell re-use identifier was wrong-- a rookie mistake but it happens: 1. Makes SURE cell re-use idenifier has no misspellings or missing letters. 2. Along same line, don't forget capitalization counts. 3. Zeroes are not "O"s (Ohs)

---